The manufacturer warrants the following:
A. Density: The manufacturer's products are made with high density polyurethane
foam with an
overall density similar to White Pine
Target in place density: 14 pcf
Molded Cord Density: 14 pcf. (ASTM-D1622)
Compression Strength: 310 psi (ASTM-D1621)
Flexural Strength: 700 psi (ASTM-D790)
Shore D Hardness: 37 (ASTM D2240)
The manufacturing process provides a greater skin density than core density
B. Surface Properties and
All products are produced incorporating a white or wood color barrier coating.
In addition to this integral barrier coat, all products receive a primer coat
with built-in UV inhibitors.
The combination of the integral shell-like skin, the barrier coat and the primer
provides an excellent substrate for durable finishes.
C. Ultra Violet: Ultra Violet rays do not effect properly
D. Compressive Strength: Falls within the 300 - 400 P.S.I.
E. Tensile Strength: Falls within the 300 - 400 P.S.I. range.
F. Flexural Strength:
degree of flexibility in any given polyurethane product is determined by the
shape and size of
cross-section. Due to the inherent flex characteristics of lineal footage
products, they will
curvature and uneven
G. Moisture Resistance:
has a closed-cell structure which provides protection from most solvents and
almost completely moisture resistant.
H. Mildew Resistance:
products are mold and mildew resistant and cannot be harmed by termites or other
I. Flammability &
Optional Class 1 Fire Rating
products are combustible when exposed to open flame, as are all wood materials
unless they have
fire retardants in the mix
Fire Rating: ASTM-E84 Class 1
UL Class A (class
1) Flame Spread Index 20, Smoke Spread Index 350 to 400
materials will expand and contract nominally depending on environmental
factors such as
temperature and humidity. Following the manufacturer's installation instructions
are provided to best address shrinkage and must be used in order not to
K. Applied finishing
materials by others.
Do not use solvent
based adhesives or paints due to the chemical reaction between
and the solvents that will dissolve the material.
warrants to the original purchaser, it's rigid polyurethane material will be
defects in material
and workmanship for as long as the original purchaser resides in the home that
installed when the polyurethane is installed, finish painted and used
instructions. To the original purchaser, for a period of one year from the date
it's white exterior
primer paint applied to the polyurethane will be free from blistering and
used installed and
finished painted under recommended conditions and instructions. The
purchaser and their
installers must inspect every piece prior to installation. Both parties
must waive all
defects which could
have been discovered by reasonable inspection prior to installation.
automatically be void if a non-approved adhesive or solvent based paints or
to follow the manufacturer's storage and handling instruction will void this
the event that the claim is made under this warranty and conditions had been
purchaser must notify the manufacturer within writing within 30 days of making
Manufacturer reserves the right to inspect the defective product on site, or
request that the original
purchase at their
expense return the defective product to the manufacturer for inspection.
determine if the product failed, and whether or not it will repair, replace, or
parts. The manufacturer shall have no liability to any person, firm, or
incidental or consequential damage such as, but not limited to, labor,
damaged in transit,
freight charges, installation, lost profits, lost sales, acts of nature, civil
or acts of
terrorism. No purchaser may take any deduction or credit against any
amount owed to the
Productions & Distribution Inc., or make any chargeback with regards to a
claim, without the
expressed written consent of the distributor. This limited warranty is
made in lieu of all
other express warranties, whether written, oral, or implied (including any
or merchant ability
or fitness of purpose), and extends only to the original purchaser's purchase.
All sales are
conducted and executed in Toronto Ontario Canada. Some states and
provinces may not
allow limitations on
how long an implied warranty lasts, or the exclusion and limitations of
damages, so the above limitations or exclusions do apply to you as all sales are
conducted in Toronto
Canada and subject to Ontario Law.