 
 Click To Find=> 
Click To=>
 ---- |
|
|
Links Below
CHAPTERS
CATALOGS
MASTER INDEX
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
|
ArchPolymer Product Specifications: High Quality - Hi-Density Arch-Polymer
ArchPolymer Product Specifications: High Quality - Hi-Density Arch-Polymer
General Description: Imperial-PolymerTM is a high density lite weight synthetic product with the similar density as white pine. It will not split, crack or rot. All products come double primed and ready to paint or faux finish. It is water and insect resistant. There are no specified lengths as all products are made from molds. It is necessary to use the approved adhesive for warranty claims.
General Description: Arch Polymer is a high density lite weight synthetic product with the same density as white pine. It will not split, crack or rot. All products come double primed and ready to paint or faux finish. It is suitable for interior and exterior applications. It is water and insect resistant. There are no specified lengths as all products are made from molds. It is necessary to use the approved adhesive for warranty claims.
Architects SpecificationsPart One - General Part Two - Submittals B. Warranty: Manufacturer's Limited One Year Warranty is to be submitted. C. Product Material Specifications: Obtain from the manufacturer for submission to the relevant building code authority. Part Three - Substitutions Part Four - Product Materials B. Any polyurethane products as distributed by Imperial are water-resistant. C. Any polyurethane products as distributed by Imperial are odor-free and release no gases. D. Imperial distributed products are vermin resistant and resistant to mold and mildew. E. Imperial's distributed products provide a greater insulating value (R value) than comparable wood product. Part Five - Delivery, Storage and Installation B. Installation instructions as provided by Imperial Productions & Distribution Inc. are to be followed completely. Use only ArchiTact(tm) Adhesive available from Imperial for installation in addition to mechanical fasteners. Material SpecificationsThe manufacturer warrants the following: Physical Properties B. Surface Properties and Finishes: All products are produced incorporating a white or wood color barrier coating. In addition to this integral barrier coat, all products receive a primer coat with built-in UV inhibitors. The combination of the integral shell-like skin, the barrier coat and the primer top coat provides an excellent substrate for durable finishes. C. Ultra Violet: Ultra Violet rays do not effect properly coated products. D. Compressive Strength: Falls within the 300 - 400 P.S.I. range. E. Tensile Strength: Falls within the 300 - 400 P.S.I. range. F. Flexural Strength: The degree of flexibility in any given polyurethane product is determined by the shape and size of its cross-section. Due to the inherent flex characteristics of lineal footage products, they will follow some curvature and uneven surfaces. G. Moisture Resistance: The polyurethane has a closed-cell structure which provides protection from most solvents and renders it almost completely moisture resistant. H. Mildew Resistance: All polyurethane products are mold and mildew resistant and cannot be harmed by termites or other insects/rodents. I. Flammability: All polyurethane products are combustible when exposed to open flame, as are all wood materials. The manufacturer does offer a Fire Resistant option with a flame spread index of 30 and a smoke index of 200 - 300. J. Shrinkage: All polyurethane materials will expand and contract nominally depending on environmental factors such as temperature and humidity. Following the manufacturer's installation instructions and ArchiTact(tm) Adhesive are provided to best address shrinkage and must be used in order not to void warranty. K. Warranty: The manufacturer warrants to the original purchaser, it's rigid polyurethane material will be free from defects in material and workmanship for as long as the original purchaser resides in the home that the product was installed when the polyurethane is installed, finish painted and used under recommended conditions and instructions. To the original purchaser, for a period of one year from the date of purchase, it's white exterior primer paint applied to the polyurethane will be free from blistering and pealing when used installed and finished painted under recommended conditions and instructions. The original purchaser and their installers must inspect every piece prior to installation. Both parties must waive all defects which could have been discovered by reasonable inspection prior to installation. Warranty will automatically be void if a non-approved adhesive is not used. Failure to follow the manufacturer's storage and handling instruction will void this limited warranty. In the event that the claim is made under this warranty and conditions had been met, the original purchaser must notify the manufacturer within writing within 30 days of making the discovery. Manufacturer reserves the right to inspect the defective product on site, or request that the original purchase at their expense return the defective product to the manufacturer for inspection. The manufacturer will determine if the product failed, and whether or not it will repair, replace, or refund said defective parts. The manufacturer shall have no liability to any person, firm, or corporation whatsoever for incidental or consequential damage such as, but not limited to, labor, finishing, parts damaged in transit, freight charges, installation, lost profits, lost sales, acts of nature, civil unrest, or acts of terrorism. No purchaser may take any deduction or credit against any amount owed to the distributor Imperial Productions & Distribution Inc., or make any chargeback with regards to a warranty claim, without the expressed written consent of the distributor. This limited warranty is exclusive, and made in lieu of all other express warranties, whether written, oral, or implied ( including any warranty or merchant ability or fitness of purpose), and extends only to the original purchaser's purchase. Some states and provinces may not allow limitations on how long an implied warranty lasts, or the exclusion and limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Specialty ProductsFire Resistance Option Building CodesAs there are numerous dominant Building Codes in existence and practice throughout North America, in addition to the many State-level and Provincial codes, Imperial strongly urges Specifiers and users to refer to their local codes as to the uses of polyurethane foam millwork and building components. As with any polyurethane foam product, they are not designed or sold to provide structural support unless otherwise stated (balustrade systems for example). Structural support mechanisms as allowed by your local Building Code can be enhanced, but not replaced with polyurethane products.
| |||||||||||||||||||||
